This guest-authored blog post examines an advanced cyber-threat discovered by Expel, using Darktrace, on a customer’s network.
The following guest-authored blog post examines an advanced cyber-threat discovered by Darktrace on a customer’s network.
At Expel — a managed security provider — our analysts get to use a lot of really cool technologies every day, including Darktrace. Given its popularity among our customers, we thought it would be useful to demonstrate how Darktrace helps us identify and triage potential security threats.
Take a look at this alert. It was triggered via a violation of one of the pre-packaged model breaches for Device / AT Service Scheduled Task.
To triage this specific alert, we need to answer the following questions:
What were the triggers that caused the model to alert?
Which host was the Scheduled Task created on?
Were any files transferred?
Is this activity commonly seen between these hosts?
By answering these questions, we can determine whether or not this alert is related to malicious activity. First, we need to gather additional evidence using the Darktrace console.
At this point, we know the model breach Device / AT Service Scheduled Task was triggered. But what does that mean? Let’s view the model and explore the logic.
Looking at the logic behind this model breach, we see that any message containing the strings “atsvc” and “IPC$” will match this model breach. And because the frequency has been set to “> 0 in 60 mins,” we can assume that once this activity is seen just one time, it’ll trigger an alert. By understanding this logic, we now know:
Next, let’s grab some data. We opened the Model Breach Event Log to see the related events observed for this model breach. There was a successful DCE-RPC bind, followed by SMB Write/Read success containing the keywords “atsvc” and “IPC$.”
We turned to the View advanced search for this event feature of the Model Breach Event Log for even more info.
The advanced search results for this model breach revealed two distinct messages. There’s a successful NTLM authentication message for the account “appadmin.” Since NTLM is commonly used with SMB for authentication, this is likely the account being used by the source machine to establish the SMB session.
Immediately after this authentication, we see the following DCE-RPC message for a named pipe being created involving atsvc:
We see that the RPC bind was created referencing the SASec interface. Based on a quick online search, we learned that the SASec interface “only includes methods for manipulating account information, because most SASec-created task configuration is stored in the file system using the .JOB file format0.”
One possible explanation for this connection is that it was made to query information about a scheduled task defined within the .JOB format, rather than a new scheduled task being created on the host. However, Darktrace doesn’t show any messages mentioning a file with the extension “.JOB” within this model breach. So we kept digging for answers.
By querying “*.JOB AND SMB” within the timeframe of the activity we’ve already observed, some promising results appeared:
We observed three unique .JOB files being accessed over SMB during the exact time of our previous observations. Considering the hosts and the timeframe, we correlated this activity to the original model breach.
So we know the following:
To answer the last investigative question, we used the query “AV.job AND SMB” over the past 60 days. This query returned daily entries for identical activity dating back several months. The activity occurred around the same time each day, involving the same hosts and file paths.
This was starting to smell like legitimate activity, but we still wanted to analyze the contents of the requested file AV.job. We created a packet capture for a five-minute window around the timeframe of the source IP address observed in the model breach.
Once we collected the PCAP, we downloaded and analyzed it in Wireshark, and then extracted the transferred files using the Export Objects feature.
The contents of this file refer to an executable in the location C:\Program Files\Sophos\Sophos Anti-Virus\BackgroundScanClient.exe. Judging by the name of the .JOB file this was found in, it was likely a legitimate scheduled task created to perform an antivirus scan on the endpoint each morning.
Reviewing our original analysis questions, we could confidently answer all four questions:
Darktrace’s cyber defense platform allowed our analysts to quickly confirm and scope potential threat activity and identify network-based indicators (NBIs) related to an attack. It can also generate additional, host-based indicators (HBIs) to supplement your investigation. In summary, Darktrace AI enables our Expel analysts quickly and efficiently scope an incident or hunt for threats across the entire organization — without the need for exhaustive data collection and offline parsing by an analyst.
Like this and want more?
Receive the latest blog in your inbox
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
NEWSLETTER
Like this and want more?
Stay up to date on the latest industry news and insights.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Darktrace cyber analysts are world-class experts in threat intelligence, threat hunting and incident response, and provide 24/7 SOC support to thousands of Darktrace customers around the globe. Inside the SOC is exclusively authored by these experts, providing analysis of cyber incidents and threat trends, based on real-world experience in the field.
The Price of Admission: Countering Stolen Credentials with Darktrace
03
Jun 2024
Using leaked credentials to gain unauthorized access
Dark web marketplaces selling sensitive data have increased accessibility for malicious actors, similar to Ransomware-as-a-Service (RaaS), lowering the barrier to entry usually associated with malicious activity. By utilizing leaked credentials, malicious actors can easily gain unauthorized access to accounts and systems which they can leverage to carry out malicious activities like data exfiltration or malware deployment.
Usage of leaked credentials by malicious actors is a persistent concern for both organizations and security providers. Google Cloud’s ‘H1 2024 Threat Horizons Report’ details that initial access seen in 2.9% of cloud compromises observed on Google Cloud resulted from leaked credential usage [1], with the ‘IBM X-Force Threat Intelligence Index 2024’ reporting 71% year-on-year increase in cyber-attacks which utilize stolen or compromised credentials [2].
Darktrace coverage of leaked credentials
In early 2024, one Darktrace customer was compromised by a malicious actor after their internal credentials had been leaked on the dark web. Subsequent attack phases were detected by Darktrace/Network and the customer was alerted to the suspicious activity via the Proactive Threat Notification (PTN) service, following an investigation by Darktrace’s Security Operation Center (SOC).
Darktrace detected a device on the network of a customer in the US carrying out a string of anomalous activity indicative of network compromise. The device was observed using a new service account to authenticate to a Virtual Private Network (VPN) server, before proceeding to perform a range of suspicious activity including internal reconnaissance and lateral movement.
Malicious actors seemingly gained access to a previously unused service account for which they were able to set up multi-factor authentication (MFA) to access the VPN. As this MFA setup was made possible by the configuration of the customer’s managed service provider (MSP), the initial access phase of the attack fell outside of Darktrace’s purview.
Unfortunately for the customer in this case, Darktrace RESPOND™ was not enabled on the network at the time of the attack. Had RESPOND been active, it would have been able to autonomously act against the malicious activity by disabling users, strategically blocking suspicious connections and limiting devices to their expected patterns of activity.
Network Scanning Activity
On February 22, 2024, Darktrace detected the affected device performing activity indicative of network scanning, namely initiating connections on multiple ports, including ports 80, 161 389 and 445, to other internal devices. While many of these internal connection attempts were unsuccessful, some successful connections were observed.
Devices on a network can gather information about other internal devices by performing network scanning activity. Defensive scanning can be used to support network security, allowing internal security teams to discover vulnerabilities and potential entry points that require their attention, however attackers are also able to take advantage of such information, such as open ports and services available on internal devices, with offensive scanning.
Brute Force Login Attempts
Darktrace proceeded to identify the malicious actor attempting to access a previously unused service account for which they were able to successfully establish MFA to access the organization’s VPN. As the customer’s third-party MSP had been configured to allow all users to login to the organization’s VPN using MFA, this login was successful. Moreover, the service account had never previously been used and MFA and never been established, allowing the attacker to leverage it for their own nefarious means.
Darktrace/Network identified the attacker attempting to authenticate over the Kerberos protocol using a total of 30 different usernames, of which two were observed successfully authenticating. There was a total of 6 successful Kerberos logins identified from two different credentials. Darktrace also observed over 100 successful NTLM attempts from the same device for multiple usernames including “Administrator” and “mail”. These credentials were later confirmed by the customer to have been stolen and leaked on the dark web.
Figure 1: Advanced Search query results showing the usernames that successfully authenticated via NTLM.
Even though MFA requirements had been satisfied when the threat actor accessed the organization’s VPN, Darktrace recognized that this activity represented a deviation from its previously learned behavior.
Malicious actors frequently attempt to gain unauthorized access to accounts and internal systems by performing login attempts using multiple possible usernames and passwords. This type of brute-force activity is typically accomplished using computational power via the use of software or scripts to attempt different username/password combinations until one is successful.
By purchasing stolen credentials from dark web marketplaces, attackers are able to significantly increase the success rate of brute-force attacks and, if they do gain access, they can easily act on their objectives, be that exfiltrating sensitive data or moving through their target networks to further the compromise.
Share Enumeration
Around 30 minutes after the initial network scanning activity, the compromised device was observed performing SMB enumeration using one of the aforementioned accounts. Darktrace understood that this activity was suspicious as the device had never previously been used to perform SMB activity and had not been tagged as a security device.
Figure 2: Darktrace/Network identifying the suspicious SMB enumeration performed by the compromised device.
Such enumeration can be used by malicious actors to gain insights into the structures and configurations of a target device, view permissions associated with shared resources, and also view general identifying information about the system.
Darktrace further identified that the device connected to the named pipe “srvsvc”. By enumerating over srvsvc, a threat actor is able to request a list of all available SMB shares on a destination device, enabling further data gathering as part of network reconnaissance. Srvsvc also provides access to remote procedure call (RPC) for various services on a destination device.
At this stage, a Darktrace/Network Enhanced Monitoring model was triggered for lateral movement activity taking place on the customer’s network. As this particular customer was subscribed to the PTN service, the Enhanced Monitoring model alert was promptly triaged and investigated by the Darktrace SOC. The customer was alerted to the emerging activity and given full details of the incident and the SOC team’s investigation.
Attack and Reconnaissance Tool Usage
A few minutes later, Darktrace observed the device making a connection with a user agent associated with the Nmap network scanning tool, “Mozilla/5.0 (compatible; Nmap Scripting Engine; https://nmap.org/book/nse[.]html)”. While these tools are often used legitimately by an organization’s security team, they can also be used maliciously by attackers to exploit vulnerabilities that attackers may have unearthed during earlier reconnaissance activity.
As such services are often seen as normal network traffic, attackers can often use them to bypass traditional security measures. Darktrace’s Self-Learning AI, however, was able to recognize that the affected device was not a security device and therefore not expected to carry out such activity, even if it was using a legitimate Nmap service.
Figure 3: Darktrace/Network identifying the compromised device using the Nmap scanning tool.
Further Lateral Movement
Following this suspicious Nmap usage, Darktrace observed a range of additional anomalous SMB activity from the aforementioned compromised account. The affected device attempted to establish almost 900 SMB sessions, as well as performing 65 unusual file reads from 29 different internal devices and over 300 file deletes for the file “delete.me” from over 100 devices using multiple paths, including ADMIN$, C$, print$.
Darktrace also observed the device making several DCE-RPC connections associated with Active Directory Domain enumeration, including DRSCrackNames and DRSGetNCChanges; a total of more than 1000 successful DCE-RPC connection were observed to a domain controller.
As this customer did not have Darktrace/Network's autonomous response deployed on their network, the above detailed lateral movement and network reconnaissance activity was allowed to progress unfettered, until Darktrace’s SOC alerted the customer’s security team to take urgent action. The customer also received follow-up support through Darktrace’s Ask the Expert (ATE) service, allowing them to contact the analyst team directly for further details and support on the incident.
Thanks to this early detection, the customer was able to quickly identify and disable affected user accounts, effectively halting the attack and preventing further escalation.
Conclusions
Given the increasing trend of ransomware attackers exfiltrating sensitive data for double extortion and the rise of information stealers, stolen credentials are commonplace across dark web marketplaces. Malicious actors can exploit these leaked credentials to drastically lower the barrier to entry associated with brute-forcing access to their target networks.
While implementing well-configured MFA and enforcing regular password changes can help protect organizations, thee measures alone may not be enough to fully negate the advantage attackers gain with stolen credentials.
In this instance, an attacker used leaked credentials to compromise an unused service account, allowing them to establish MFA and access the customer’s VPN. While this tactic may have allowed the attacker to evade human security teams and traditional security tools, Darktrace’s AI detected the unusual use of the account, indicating a potential compromise despite the organization’s MFA requirements being met. This underscores the importance of adopting an intelligent decision maker, like Darktrace, that is able to identify and respond to anomalies beyond standard protective measures.
Credit to Charlotte Thompson, Cyber Security Analyst, Ryan Traill, Threat Content Lead
Exploring the Benefits and Risks of Third-Party Data Solutions
03
Jun 2024
Why do companies allow third parties to handle their data?
Companies seek out third parties to handle their data for operational efficiency.
The scale and cost of maintaining in-house infrastructure can be outsourced to third parties who specialize in data management or in certain business functions.
Third parties who handle an organization’s data can range from large public cloud providers such as Azure or AWS, to boutique companies who handle specific business functions such as telemarketing, payment systems, or webpage hosting.
The operational efficiencies gained through third-party data management can be summarized by three key benefits:
Global accessibility: Third-party data storage enables data access across the globe, allowing businesses to access data from anywhere.
Enhanced collaboration: Third-party data storage allows for file sharing, real-time editing, and integration with other applications and services enhancing a business’s collaboration efforts.
Reliability and uptime: Reputable third-party storage providers offer high reliability and uptime guarantees, ensuring that data is available whenever needed. They typically have robust disaster recovery and backup systems in place to prevent data loss.
Given these benefits, it is no surprise that businesses are using these services to expand their operations and scale efforts with the need of a growing business. This strategic move not only optimizes resource allocation but also enhances operational agility, enabling businesses to adapt swiftly to evolving data demands and maintain a competitive edge in a dynamic market.
Security risks of entrusted data to third-party vendors
Entrusting data to third parties can expose businesses to supply chain risks and increase the risk of data breaches and unauthorized access. A business has less control over its data and becomes dependent on the third party's policies, practices, and uptime. Many third-party vendors are the target of hackers who specialize in monetizing sensitive data and exploiting gray areas around who is responsible for securing the data.
Thus, businesses are vulnerable when they entrust sensitive data to third-party platforms, which often lack transparency about data usage and security. The platforms, chosen mainly for cost, efficiency, and user experience, are frequent targets for cyber criminals, hacktivists, and opportunistic lone hackers looking for sensitive data accidentally exposed due to misconfigurations or poor data management policies.
Consumers are putting pressure on businesses to improve cybersecurity when handling their personal data. Businesses who suffer a data breach face a high level of scrutiny from customers, investors, the media, and governments, even when the data breach is the result of a third party’s being hacked. For example, Uber made headlines in 2022 for a data breach which was the result of a compromised vendor who had access to data regarding Uber’s employees.
Similarly, the UK’s Ministry of Defence was the victim of a data breach earlier this year when hackers targeted a third party payroll system used by the government department.
Why do cyber-criminals target third parties?
Cyber-criminals can potentially gain access to multiple networks when targeting a third-party storage provider. A successful attack could give attackers access to the networks and systems of all its clients, amplifying the impact of a single breach.
For example, when Illuminate Education was the target of a cyber-attack, the data of 23 US School Districts was stolen via its student-tracking software. It included student data from the country's two largest school systems - New York City Public Schools and Los Angeles Unified School District.
Common third-party security risks
When collaborating with third parties, organizations should be aware of the most common types of security risks posed to their cybersecurity.
Software supply chain attacks: Software supply chain attacks occur when cyber criminals infiltrate and compromise software products or updates at any point in the development or distribution process. This allows attackers to insert malicious code into legitimate software, which then gets distributed to users through trusted channels.
Human error: Human error in cybersecurity refers to mistakes made by individuals that lead to security breaches or vulnerabilities. These errors can result from lack of awareness, insufficient training, negligence, or simple mistakes.
Privileged access misuse: Privileged access misuse involves the inappropriate or unauthorized use of elevated access rights by individuals within an organization. This can include intentionally malicious actions or unintentional misuse of administrative privileges.
What to look for in a security solution when using third parties to store or manage data
Understanding the security posture of a third party is important when partnering with it and entrusting it with your organization’s data. Understanding how basic cyber hygiene policies are implemented is a good place to start, such as data retention policies, use of encryption for data in storage, and how identity and access are managed.
In some circumstances, it is important to understand who is responsible for the data’s security. For example, when using public cloud infrastructure, it is generally the responsibility of the data owner to manage how the data is accessed and stored.
In that situation, an organization needs to ensure it has solutions in place which gives it full visibility of that third-party environment, and which can proactively identify misconfigurations and detect and respond to suspicious activity in real time.
Benefits of using AI tools to aid in managing sensitive data
According to research performed by IBM, organizations with extensive use of security AI and automation identified and contained a data breach 108 days faster in 2023 than organizations that did not use AI for cybersecurity. (1) This figure is only likely to improve as companies mature in their adoption of AI for cyber security and can be a key indicator in the security posture of a third-party vendor.
Example of third-party security incidents
Sumo data breach
Sumo, an Australian energy and internet provider, suffered a data breach which they became aware of on May 13th, 2024. Further investigation into the cyber incident has found that “the personal details of approximately 40,000 customers were compromised, including approximately 3,000 Australian passport numbers.” (2)
While none of Sumo’s systems were allegedly accessed or affected and the third-party application also worked as designed (3), the incident was blamed on an unnamed third party. The breach may have been the result of a misconfiguration or human error.
This incident underscores the importance of not only selecting third-party providers with robust security measures but also continuously monitoring and assessing their security practices.
How Darktrace helps monitor third-party data usage
Darktrace/Cloud uses Self-Learning AI to provide complete cyber resilience for multi-cloud environments.
Benefits of Darktrace/Cloud:
Architectural awareness: Gives users an understanding of their cloud footprint, including real-time visibility into cloud assets, architectures, users and permissions. Combines asset enumeration, modeled architectures, and flow log analysis. Cost insights give a better understanding of resource allocation, helping teams contextualize resources.
Cloud-native detection and response: AI understands ‘normal’ for your unique business and stops cyber-threats with autonomous response. Near-real-time response goes beyond simple email alerts or opening a ticket; and includes cloud-native actions like detaching EC2 instances and applying security groups to contain risky assets.
Cloud protection and compliance: Identify compliance issues and potential misconfigurations with attack path modeling and prioritized remediation steps. Darktrace’s attack surface management (ASM) adds a critical external view of your organization, highlighting vulnerabilities most impactful to your specific situation and revealing shadow IT.
